在线留言
首页 >> 产品总汇 >> 粉尘防爆 >> BYS51-F系列粉尘防爆防腐全塑荧光灯(DIP)
BYS51-F系列粉尘防爆防腐全塑荧光灯(DIP)
BYS51-F系列粉尘防爆防腐全塑荧光灯(DIP)
BYS51-F type dust explosion & corrosion-proof full plastic fluorescent lamp(DIP)
管家婆资料正版
型号含义 Modelimplication
管家婆资料正版
适用范围 Applications
1.20区、21区、22区危险场所;
2.可燃性粉尘环境;
3.户内、户外(IP54、IP65*);
4.温度组别:T1~T4/T5/T6;
5.应用于石油、化工、航天、军工等场所。
1.Hazardous:division zone 20,21,&22;
2.Flammable dust atmospheres;
3.Indoor or outdoor(IP54,IP65*);
4.Temperature class:T1~T4/T5/T6;
5.Widely using in the fields of oil ,Chemical industry, spaceflight, war ind-ustry and so on.
产品特点 Features
1.外壳采用高强度的SMC模压成型,灯罩采用透光性能好、耐强冲击的聚碳酸脂注塑成型;
2.外壳采用密封结构,具有了良好的防水、防尘防强腐蚀等性能;
3.内装电子镇流器为我公司特制的防爆镇流器,具有短路和开路保护性能,针对灯管的老化效应和漏气现象预防电路,使灯具能正常工作,且高效节能COSф≥0.98,具有宽电压输入,在电压170~250V AC范围内,均能保持恒功率输出;
4.电子镇流器配用灯管为普通T8灯管,降低了用户的维修费用;
5.配电感镇流器采用单脚快速瞬时启动灯光;
6.可根据用户要求配置应急装置,当外界断电时,灯具自动切换到应急照明状态;
7.灯具内装防爆开关,配置开盖断电链锁装置;
8.钢管或电缆布线(钢管布线时请注明)。
1.The enclosure is moulded by the high strength SMC. Lamp housing is made of polycarbonater, which has fine light transmittance and impact resistance properties.
2.It has sealing structure, which has ensured the great functions of water proof and dust proof.
3.Inner electronic ballast is our compny's special explosion-proof ballast, and it has protection functions of short circuit and oen circuit. For the phenomenons of tubes' aging effect and air leakage, it should have standby circuit in order to keep it working. The high energy saving is COSф ≥0.98,and it has the wide range of input voltage. It can keep contant power output within170V~250VAC.
4.In order to reduce the cost of customer’ s maintenance, we use the normal tube of T8 as the tube of electronic ballast.
5.The lamp, with electric induction ballast, is adopted the single pin to turn on instantly.
6.We can conform the customers' requirements to add an emergency device. If the power is cut off, it will be turned to emergency lighting automatically.
7. There is an explosion-proof switch in the interior, and it should be added interlock device for opening the cover, when the power is cut off.
8.Wiring with steel tube or cable.(Please specify wiring with steel tube.)
主要技术参数 Main technical parameters
功率
Power
电压
Voltage
充电时间
Charging time
应急启动时间
Time of emergency lighting
应急启动时间
Time of emergency lighting
电缆外径
Cable outer dia.(mm)
电缆入口
Cable inlet(G)
20×(1~2)(J)
40×(1~2)(J)
~220V DC6V* 24h* 0.3s* 90min* φ8~φ14 3/4
 
防爆标志
Ex-mark
防护等级
Degree of protection
防腐等级
Erosion-proof-class
DIP A20 TA,T6等效于 Ⅱ1D ExtD A20 T6(欧标) P65 WF2
外形及安装尺寸 Outline & installation dimensions
管家婆资料正版
管家婆资料正版
安装配件表 Installation accessories and spare parts
序号
No.
名称 Description 备注 Remark 序号
No.
名称 Description 备注 Remark
1
 
灯具 Lamp
 
  9
 
吊钩 Hook
 
 
2 安装管夹 Pipe clamp   10 链条 Chain  
3 挠性连接管 Flexible connecting pipe 用户自备Self-prepare 11 壁式安装架 Wall mounting rack  
4 平台弯杆 Platform bend-rod type   12 吊环螺钉 Eye bolt  
5 平台管子 Platform tube   13 平台灯接线盒 Platform Light Junction Box  
6 连接管 Connecting pipe   14 U型管夹 U-tube clip 用户自备Self-prepare
7 吸顶式安装件 Ceiling mounting   15 底板 Bottom board  
8 吸顶脚 Ceiling feet    
 
 

产品关键字:防爆防腐全塑荧光灯 荧光灯
相关产品